Replacing the rear windshield wiper on your car can be a daunting task. It is something that most people have never done before, and it can seem like a complicated process. But we assure you it’s simple.
In this guide, we will walk you through the process of replacing your car’s rear windshield wiper. We will provide you with the information you need to get the job done quickly and efficiently. So don’t worry because we’ve got you covered.
How to Replace Rear Windshield Wiper?
If your rear windshield wiper is no longer working, it may be time to replace it. Here is a quick guide on how to do so:
- Lift the wiper arm away from the glass.
- Remove the nut that holds the wiper blade in place.
- Pull the old wiper blade off of the arm.
- Install the new wiper blade onto the arm and secure it with the nut.
- Lower the arm back into place against the glass.
What Will I Need For The Process?
To replace your rear windshield wiper, you will need some tools to get the job done.
Here’s what you’ll need:
- A new rear windshield wiper blade (make sure to buy the correct size)
- A Phillips head screwdriver
- A flathead screwdriver
- An assistant (optional)
How To Do It?
First, you’ll need to remove the old rear wiper blade. Turn on your ignition, but not the engine. Turn on your rear windshield wipers, and as soon as they are up, turn the car off. This will make it easier for you to replace them since they will be in a more favorable position.
Make sure to have your old wipers and rear windshield clean first. If your car has a rear wiper arm cover, use the Phillips head screwdriver to remove the screws and set them aside. If there are no covers, you can skip this step. Next, locate the tab or release lever on the wiper arm and press it down.
To do this, lift the tab or the wiper lever at the end of the wiper arm. This will release the pressure on the wiper blade, and you can then pull it off of the arm.
This will allow you to slide the wiper blade off of the arm. Once the blade is off, inspect the area where it attaches to the arm for any damage or debris. Clean it off if necessary.
Now you’re ready to install the new blade assembly. Next, you need to clean off the windshield.
Make sure that there is no dirt or debris on the glass. This could prevent the new wiper from making proper contact. Once your windshield is clean, you can lower the new wiper into place and snap it into position.
Slide it onto the wiper arm until it clicks into place. If your car has a rear wiper arm cover, use the Phillips head screws to secure it in place. Finally, test out your new rear windshield wiper by turning on the car and activating the wipers.
Problems With The Rear Wiper Motor?
If your windshield wiper motor breaks down, there are a few things you can do to try and fix the problem. First, check the fuse box to see if a fuse has blown. If so, replace the fuse and see if that fixes the problem.
If not, you may need to replace the windshield wiper motor itself. This is a more difficult repair, so you may want to take it to a mechanic or auto body shop.
How Much Does A New Wiper Blade Cost?
The cost of a new rear windshield wiper blade will vary depending on the make and model of your car. You can find them for around $15-$25. It’s always a good idea to check with your local auto parts store or dealership to be sure.
You can buy a new rear windshield wiper blade at most auto parts stores or dealerships. You can also find them online from a variety of retailers.
Some car brands have a different process for replacing rear windshield wipers. Be sure to check your car’s owner’s manual for specific instructions.
Some car brands will have specialized windshield wipers for each specific car. In this case, it is best to buy the recommended wiper blades from a reputable car parts store.
When Should I Replace My Wiper Blades?
There are a few signs your rear window wiper may need replacing. These include streaks or smears on the glass, noisy operation, or damaged blades. If you notice any of these issues, it’s best to replace the blade as soon as possible.be repla
It’s recommended you replace wiper blades at least once per year or sooner if they show signs of wear. If you live in an area with a lot of snow and ice, you may need to replace them more often. Be sure to check your owner’s manual for specific recommendations.
We hope that this step-by-step guide has been helpful. Replacing the rear windshield wiper on your car is a simple process that anyone can do. Follow these easy steps, and you will be up and running in no time. Thanks for reading!