Headlights are an important part of any car. Not only do they allow you to see in the dark, but they also help other drivers see you. Over time, headlights can become hazy and covered in a film because of oxidation.
This makes them less effective and can even lead to decreased safety while driving. In this blog post, we will discuss how to remove haze from headlights and keep them shining bright.
So How To Remove Haze From Headlights?
There are a few different ways that you can clean haze from headlights. Headlight restoration kits include everything needed to clean and restore headlights. Another way to clean haze from headlights is to use a DIY solution. You can make your headlight cleaner using things like vinegar, water, and baking soda.
If you want to restore your headlights yourself, start by mixing equal parts vinegar and water in a bowl. Next, take a sponge or cloth and soak it in the mixture.
After soaking, rub the sponge or cloth over the headlight in a circular motion. After you have gone over the entire headlight, rinse it off with water. Finally, use a clean cloth to dry the headlight.
Once you have cleaned your headlights, you should protect them from future oxidation. You can do this by applying a sealant to the headlights.
There are many different brands of sealants on the market, so find one that fits your needs and budget. Apply the sealant according to the instructions on the packaging.
If you want more vehicle maintenance tips, check out our other articles.
How Do Headlight Restoration Kits Work?
Headlight restoration kits should come with three different abrasive pads. The first pad is a coarse sanding pad to remove the majority of the oxidation and haze from the headlight.
The second pad is a finer sanding pad to smooth out the headlight. The third pad is a polishing pad to restore the shine to the headlight.
To use a headlight restoration kit, you will first need to wash your headlights with soap and water. This will help remove any dirt or grime that could prevent the pads from working.
Next, you will need to dry off your headlights completely. Once your headlights are dry, you can begin sanding them with the coarse sanding pad. Move the pad back and forth over the headlight until most of the oxidation is gone.
After you have sanded your headlights with the coarse sanding pad, you will need to use the fine sanding pad. Move the pad back and forth over the headlight until the haze is gone. Once you have finished sanding, use the polishing pad to restore shine to your headlights.
Finally, you’ll polish the lens with the polishing compound to restore its shine.
If your headlights are dull or damaged, repeat the process a few times to get the best results. Once you’re finished, apply a coat of wax or protective sealant to protect the headlight lens.
Headlight restoration kits are at most auto parts stores. They usually range in price from $30-$60. The DIY solution will cost less than $20.
DIY Headlight Cleaner
If you don’t want to buy a headlight restoration kit, you can also clean your headlights using a DIY solution.
You will need:
- A bucket of water
- A spray bottle
- Abrasive sandpaper
- A sponge
- A soft microfiber cloth
- Baking powder
To make your headlight cleaner, mix equal parts of water and vinegar in a spray bottle. Then, add a teaspoon of baking soda to the mixture and shake well. After washing your headlights with soapy water, dry them and use sandpaper to buff them.
Sanding headlights with dry sandpaper will make the damaged surface even again. The sanding process could take a while since you are doing it by hand. Be careful not to sand away too much of the surface of your headlights.
To use the cleaner, spray it onto your headlights and let it sit for a few minutes. Next, take a sponge or cloth and soak it in the mixture. Once soaked, Rub the sponge or cloth over the headlight in a circular motion. After you have gone over the entire headlight, rinse it off with water.
Then, use a clean microfiber cloth to wipe away the cleaner. You may need to repeat this process a few times to remove the haze from your headlights.
In the end, you can apply some sort of UV sealant that will protect your headlights long-term.
How To Protect Your Light From Getting Hazy
Now that you can clean haze from headlights, you should learn how to prevent it in the first place. There are a few things that you can do to protect your headlights and keep them shining bright.
One way to protect your headlights is to clean them with soap and water. This will help remove any dirt or grime that could cause oxidation.
Another way to protect your headlights is to apply a sealant after cleaning them. This creates a barrier between the headlight and the elements to prevent oxidation.
You can also use a headlight cover or shield when driving. This will help deflect debris and other items that could damage your headlights.
If possible, park your car in the garage where it will not endure constant, bombarding UV rays.
Headlights are an important part of any car that you should keep clean. Over time, they can become hazy and covered in a film because of oxidation. This makes them less effective and can even lead to decreased safety while driving.
In this blog post, we have discussed how to clean haze from headlights and keep them shining bright. We hope you found this information helpful and now you can clean your headlights with ease. Thanks for reading!